Advertisement
Quick Links
ver. 1.0
How to: Wi Single-Point Calibration
Sette 270Wi ONLY
Time: 5 min
Difficulty: Easy
Tools/supplies: 500g weight. Acaia Calibration Weight recommended: https://acaia.co/
Parts: N/A
Additional Resources: N/A
*** Unplug the grinder from power supply ***
This guide does NOT apply to the 270W
500g Calibration Weight
www.baratza.com
support@baratza.com
rev. 4/23/2019
Advertisement
Related Manuals for Baratza Sette 270Wi
Summary of Contents for Baratza Sette 270Wi
- Page 1 1.0 How to: Wi Single-Point Calibration Sette 270Wi ONLY Time: 5 min Difficulty: Easy Tools/supplies: 500g weight. Acaia Calibration Weight recommended: https://acaia.co/ Parts: N/A Additional Resources: N/A *** Unplug the grinder from power supply *** This guide does NOT apply to the 270W 500g Calibration Weight www.baratza.com...
- Page 2 This guide does NOT apply to the 270W Unplug the grinder from power. Remove the grounds catch bin. Remove the silicone grounds tray The tray may impede calibration if the bin comes into contact with it. www.baratza.com support@baratza.com rev. 4/23/2019...
- Page 3 Pg. 3 Press & Hold Preset 1 and plug the grinder into power. Continue holding Preset 1 until the display reads Release Preset 1 www.baratza.com support@baratza.com rev. 4/23/2019...
- Page 4 Press STOP to tare the empty grounds bin. IMPORTANT The following 3 steps must be completed within 2 seconds or the unit will reboot. If the unit reboots, start again from the beginning of this guide. www.baratza.com support@baratza.com rev. 4/23/2019...
- Page 5 Pg. 5 Complete the following steps QUICKLY: Remove the grounds bin. Place a 500g weight into the bin. Return the bin with weight to the convertible device holder. www.baratza.com support@baratza.com rev. 4/23/2019...
- Page 6 If display shows E05 place the grinder on a more stable surface and try again. E05 is an error code created by instability. If you have any questions or encounter any issues with this guide, contact support@baratza.com www.baratza.com support@baratza.com rev. 4/23/2019...