Huawei ePico3801 User Manual page 44

4 Commissioning the ePico3801
Step 2 3.1 Logging in to the ePico
Trouble Diagnose and select Show All Result. Then, click Start to start checking the
transmission status of the ePico3801.
Step 3 Check the statistical information SCTP State, SecGW LINK, APM LINK, and TSP Current
State and ensure that the transmission between the ePico3801 and the NEs is normal.
1.
2.
3.
4-6
WebUI. In the Execute Trouble Diagnose window, select Transfer
Check the SecGW LINK status.
If...
The test results of SecGW
LINK are as follows:
4 packet(s) transmitted
4 packet(s) received
Percent 0.00 packet lost
round-trip min/avg/max =
1/3/10 ms
The test result of SecGW
LINK is Invalid or TimeOut
Check the SCTP State status.
If...
The SCTP State status
is OK
The SCTP State status
is NOK
Check the APM LINK status.
If...
The test results of APM
LINK are as follows:
4 packet(s) transmitted
4 packet(s) received
Percent 0.00 packet lost
round-trip min/avg/
max = 1/3/10 ms
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
The network
transmission
between the
ePico3801 and the
SecGW is normal.
The communication
between the
ePico3801 and the
SecGW fails.
Description Then...
The SCTP link is Go to
established.
The SCTP link is Ensure that the IPsec tunnel between the
not established. ePico3801 and the firewall is
The established successfully.
communication
between the ePico
and AG fails.
Description Then...
The network Go to
transmission
between the
ePico3801 and the
APM is normal.
Then...
Go to Step 3.2.
Check whether the IP address
l
of the firewall configured on
the ePico is correct.
Check whether the firewall
l
works normally.
Step 3.3.
Step 3.4.
Issue 01 (2009–09–23)
ePico3801
User Guide