Converting From Vacuum To Blower - Toro 51617 Instructions Manual

Converting from Blower to
Vacuum
WARNING
The impeller rotates for a few seconds after you turn
off the appliance and can cut or injure fingers.
Do not remove the bottom inlet cover when the motor
is running or when the appliance is plugged into a
power outlet.
1. Remove the bottom inlet cover and the blower tube.
2. Install the vacuum tube and bag.
Important:
The motor should not run unless the
vacuum tube is locked in place.
Note:
If the motor runs without the inlet cover in place, do
not use the appliance. Return it to an Authorized Service
Dealer.
3. Adjust the bag strap as needed for comfortable operation.
Converting from Vacuum to
Blower
1. Remove the vacuum bag and the vacuum tube.
g227756
2. Install the blower tube and bottom inlet cover.
Important:
bottom inlet cover is locked in place.
Note:
If the motor runs without the inlet cover in place, do
not use the appliance. Return it to an Authorized Service
Dealer.
g227757
3
The motor should not run unless the
g227758
g227759