Huawei Mate20 User Manual page 82

Answer a New Incoming Call During a Call
1
When you receive an incoming call when you are already engaged in a previous call,
touch to answer it.
2
Touch , or touch a held call in the call list to switch between the two calls.
Enable Call Forwarding
After the Call forwarding feature is enabled, calls that meet your pre-set conditions will be
automatically transferred to a specified phone number. This feature requires the support of
your carrier. For details, contact your carrier.
1
Open Phone, go to
2
Select and enable a forwarding method, then enter and confirm the target number.
If your phone has two SIM cards installed, configure the settings for SIM 1 and SIM 2
respectively.
This feature may vary depending on your carrier.
Disable Call Forwarding
1
Open Phone, go to
2
Select the forwarding mode and disable it.
Make a Call
Dial a Number or Select a Contact to Make a Call
Use either of the following methods to make a call:
Open Phone, enter part of a phone number, the first letter of a contact's name, or a
•
contact's initials to find a contact, then touch to make a call.
Open Phone, touch the Contacts tab, then search for a contact or select a contact in the
•
contact list to make a call.
Touch to end the call.
Use Speed Dial
Once you've set up speed dialing for a contact, you can quickly call that contact with the
assigned number key.
Go to Phone >
speed dial number.
Press the Power Button to End a Call
During a call, press the Power button to end the call.
> Settings, and touch Call forwarding.
> Settings, and touch Call forwarding.
> Settings > Speed dial, select a number key, then set a contact for this
Apps
78