Huawei Mate20 User Manual page 130

Enable Dolby Atmos
Dolby Atmos intelligently identifies audio content and automatically adjusts the audio quality
to bring you an immersive surround sound experience.
Go to Settings > Sounds & vibration > Dolby Atmos and select an option.
Dolby Atmos will be enabled when the speaker is enabled on your phone.
Do Not Disturb Mode
Do Not Disturb helps you prevent interruptions when you need to focus. When this mode is
enabled, calls and messages will be muted and banner notifications will not be displayed.
Enable or Disable Do Not Disturb
You can enable or disable Do Not Disturb using either of the following methods:
Swipe down from the status bar to open the notification panel, swipe down on it again to
•
show all shortcuts, then turn on or turn off Do Not Disturb. You can touch and hold Do
Not Disturb to access the settings screen.
Go to Settings > Sounds & vibration > Do Not Disturb, and enable or disable Do Not
•
Disturb.
Once Do Not Disturb has been enabled,
notifications, go to the lock screen or swipe down from the status bar to open the
notification panel. Swipe left on a notification and touch
When receiving incoming calls, notifications, and messages, your phone will be muted and
will not automatically turn on its screen or display banner notifications.
Set a Schedule for Do Not Disturb
1
Go to Settings > Sounds & vibration > Do Not Disturb, and disable Do Not Disturb.
2
Enable Scheduled. Your phone will enter Do not disturb mode at the specified time on
Saturdays and Sundays by default.
3
Touch Scheduled to set the time frame and repeat cycle.
4
You can also touch Add to set multiple start times.
Make Exceptions in Do Not Disturb Mode
While in Do Not Disturb mode, you can enable your phone to ring for calls and messages
from certain sources so you don't miss anything important.
Go to Settings > Sounds & vibration > Do Not Disturb, and enable Do Not Disturb or
Scheduled. Then you can:
Touch Calls or Messages and select one of the options. If you set an exception, your phone
•
will ring for calls or messages from the selected source.
will display in the status bar. To check for
to delay the notification.
Settings
126