Transferring Settings From An Sd Card - Epson LightScene EV-110 User Manual

Transferring Settings from an SD Card

After saving projector settings to an SD card, you can transfer them to another projector of the same
model.
Note: Make sure the SD card contains only one settings transfer file from another projector of the same
model. The settings are contained in a file called pjconfdata.bin. If the drive contains other files, the
transfer may not complete correctly.
Do not adjust image settings on a projector until after you transfer settings to it. Otherwise, you may have
to repeat your adjustments.
1. Turn off the projector and unplug the power cord from the projector's power inlet.
2. Insert the SD card into the projector's card slot.
Note: Insert the SD card directly into the projector. Do not use a hub or your settings may not
transfer correctly.
3. Press and hold the Menu button on the remote control as you connect the power cord to the
projector's power inlet.
134