Specifications; Operation; Before Operation; Before Operation Safety - Toro 29732 Manual

1. Grass bag
2. Side-discharge chute

Specifications

Model Weight
34 kg
29732 (76 lb)
39 kg
29734 (85 lb)
Figure 11
3. Battery charger
(electric-start model only)
Length Width Height
140 cm 56 cm
(55 (22
inches) inches)
140 cm 56 cm
(55 (22
inches) inches)

Operation

Note:
Determine the left and right sides of the
machine from the normal operating position.

Before Operation

Before Operation Safety

General Safety
•
Become familiar with the safe operation of the
g197496
equipment, operator controls, and safety signs.
•
Check that all guards and safety devices, such as
deflectors and/or grass catcher, are in place and
working properly.
•
Always inspect the machine to ensure that the
blades, blade bolts, and cutting assembly are not
worn or damaged.
•
Inspect the area where you will use the machine,
and remove all objects that could interfere with
the operation of the machine or that the machine
102 cm
could throw.
(40
•
Adjusting the cutting height may bring you into
inches)
contact with the moving blade, causing serious
102 cm
injury.
(40
inches)
– Shut off the engine, remove the ignition key
(electric-start model only), and wait for all
moving parts to stop.
– Do not put your fingers under the housing
when adjusting the cutting height.
Fuel Safety
•
Fuel is extremely flammable and highly explosive.
A fire or explosion from fuel can burn you and
others and can damage property.
– To prevent a static charge from igniting the fuel,
place the container and/or machine directly on
the ground before filling, not in a vehicle or on
an object.
– Fill the fuel tank outdoors, in an open area,
when the engine is cold. Wipe up any fuel that
spills.
– Do not handle fuel when smoking or around an
open flame or sparks.
– Do not remove the fuel cap or add fuel to the
tank while the engine is running or hot.
– If you spill fuel, do not attempt to start the
engine. Avoid creating a source of ignition until
the fuel vapors have dissipated.
8