1-3-8. OPT UNIT Assy and Lamp Box
* To remove the optics block assy, remove the C board beforehand.
5 Cord
(Lamp power supply block)
2 Screw (+B 3x8)
3 Thermostat
7 Lamp house,
Plate (LMP)
1-3-9. Prism Block Assy
* To remove the prism block assy, remove the C board beforehand.
VPL-PX41
4 Two screws
1 Open the lamp door
on the back of the main unit
(+PSW 3x10)
and loosen this screw fully.
6 Two screws
(+PSW M3x8)
2 Shade plate
4 Two screws (+B 3x8)
5 Prism block assy
8 Four screws
(+PSW M3x8)
!/ Lamp box
9 OPT UNIT assy
1 Three screws (+B 3x8)
3 Prism retainer
1-7