Automatic Transmission - Mercedes-Benz S-Class Coupe Series Operator's Manual

Press DYNAMIC SELECT switch
#
or backwards.
The drive program selected appears in the
multifunction display.
Configuring drive program I
Multimedia system:
Vehicle e DYNAMIC SELECT
4 5
Individual
5
Select the individual setting.
#
Switching the operation feedback for drive
programs on or off
Multimedia system:
Vehicle e DYNAMIC SELECT
4 5
Switch Notification for User on O or off ª.
#
When this function is active, a corresponding
message is shown in the media display when
a drive program is selected with the
DYNAMIC SELECT switch.
1 forwards Displaying vehicle data
Multimedia system:
Vehicle e DYNAMIC SELECT
4 5
Select Vehicle
#
The vehicle data is displayed.
Displaying engine data
Multimedia system:
Vehicle e DYNAMIC SELECT
4 5
Select Engine Data.
#
% The actual (maximum) values that can be
achieved for engine output and engine tor‐
que may deviate from the certified values
within the country-specific guidelines for
permissible tolerances (basis: UN-ECE No.
85 or country-specific guidelines).
Factors that can influence this are, for exam‐
ple:
Sea level
R
Fuel grade
R
Outside temperature
R
%
Data.

Automatic transmission

DIRECT SELECT lever
Function of the DIRECT SELECT lever
Driving and parking 139
Operating temperature of the engine
R
The values displayed serve only as orienta‐
tion. The values for engine output and
engine torque shown in the media display
may deviate from the actual values.
& WARNING Risk of accident due to incor‐
rect gearshifting
If the engine speed is higher than the idle
speed and you engage the transmission posi‐
tion h or k, the vehicle may accelerate
sharply.
If you engage the transmission position
#
h or k when the vehicle is at a
standstill, always depress the brake
pedal firmly and do not accelerate at
the same time.