Polycom VVX 600 Phone Manual page 4

Telstra VVX 600/601 Phone Guide
Feature Access Codes; Call Forward Always,
Call Forward No Answer, Call Forward Busy.
To forward all your calls to another number
Press the Forward soft key
Select Always
Enter the required number to forward your calls
Tap the Enable soft key
An arrow is displayed on the phone
screen next to your phone number.
Tap the Forward soft key
Tap Always
Tap Disable
To forward your calls to another number if not
answered after a specified number of rings
Tap the Forward soft key
Tap No Answer and select
Enter the required number to which to forward
your calls
Tap Forward After Rings field and enter the
required number of rings (20 rings is the
maximum)
Tap the Enable soft key
Tap the Forward soft key
Tap No Answer.
Tap the Disable soft key
Telstra VVX 600/601 Phone Guide | August 2016
To forward your calls to another number if
you are engaged on a call
Tap the Forward soft key
Tap Busy
Enter the required number to which to forward
your calls
Tap the Enable soft key
Tap the Forward soft key
Tap Busy
Tap the Disable soft key
Call Forwarding is not available on Shared
Lines
When you enable Do Not Disturb (DND), you
prevent your phone from ringing. All incoming
calls are sent directly to voicemail. All calls
received while DND is enabled, will be
displayed in your Recent Calls list
From Home View
Tap DND icon
Or
From Line View
Tap the DND soft key tab
The Do Not Disturb icon displays on screen
when enabled
From Line View
Tap DND soft key, the icon changes on the
screen to display Do Not Disturb is disabled
Or
From Home View
Tap DND
The Do Not Disturb Service has been turned
off.
While engaged in one call:
Tap the Confrnc soft key
Enter the required number or extension of the
second party
When the call connects:
Tap the Confrnc soft key
All parties are connected in a three-way call.
To end the conference:
Press the End Call soft key
Note: If either of the other two parties hang up,
your call with the remaining party stays intact. If
you hang up, the other two parties will be
disconnected
Note: There can be a maximum of 3 parties on
a conference call, unless you have the
Executive service pack which has the N-Way
feature which enables a total of 8 parties on a
Conference call.
Page 4