IBM 0663 Series Manual page 8

Platform(s)
Operating System(s) VMS V5.4.2
Note: Attachment to earlier versions of the VMS operating systems is not possible.
Configuration Required:
Alter MODE SELECT Page 1, Byte 2 to '04'
Alter MODE SELECT Page 7, Byte 2 to '04'
Platform(s)
Operating System(s) Ultrix V4.1
Configuration Required:
Connect 'OPTION PIN' on drive jumper block to ground.
Platform
Operating System(s) Ultrix V4.1
Configuration Required:
No modifications to the drive are required. However it is necessary to modify the list of device
types on the table of known drives contained in the 'usr/sys/data/scsi-data,c' system file as follows:
Change first line from '/*UNKNOWN DISK*/' TO '/*IBM OEM*/'. Following this change, the
operating system kernel must be rebuilt (recompiled).
Platform
Operating System(s) Sunos V4.1.2
Configuration Required:
The drive will attach with no changes but should the drive enter degraded mode, due for instance
to an interrupted format, it will be necessary to ground the option pin on the drive jumper block
before the drive can be reformatted on the system.
Device Parameter Settings Declared to System:
The system will accept a wide range of settings provided these do not result in the total number
of data sectors declared (Data Cylinders x Heads x Sectors per track) exceeding the number
available on the drive.
Platform(s)
Operating System(s) Proprietary (supplied with platform)
DECDECStation 3100
DECVAXStation 3100
DECMicroVax 3100
VMS V5.5
VMS V5.6
DECDECStation 3100
DECVAXStation 3100
DECMicroVax 3100
Ultrix V4.2
DECStation 5000
Ultrix V4.2
SUNSpareStation
Sunos V4.1.3
NEXTStation, NEXTCube