Sony HCD-SBT100 Service Manual page 24

HCD-SBT100/SBT100B/SBT300W/SBT300WB
5. When pressing the [ TUNE +] button again, the MC ver-
>
sion is displayed on the fl uorescent indicator tube.
6. Each time [ TUNE +] button is pressed, tthe display
>
changes MCS version → MTK version → OPU version →
NWM version (HCD-SBT300W/SBT300WB only) → BTM
version → GC version → USBL version → NWA version
(HCD-SBT300W/SBT300WB only) → NWD version (HCD-
SBT300W/SBT300WB only) → BTA version → BTL version
→ CD version → CDMA version → CDMB version → ST
version → TA version → TM version this order, and returns to
the MC version display.
MC version
STEREO
MCS version
STEREO
MTK version
STEREO
OPU version
STEREO
NWM version (HCD-
SBT300W/SBT300WB only)
STEREO
BTM version
STEREO
GC version
STEREO
USBL version
STEREO
NWA version (HCD-
SBT300W/SBT300WB only)
STEREO
(Displayed values in the above fi gure are example)
7. When pressing the [ ] button while the each version is dis-
x
played, year, month and day of the software creation is dis-
played. When pressing the [
turns to the each version display.
8. When pressing the [
.
played on the fl uorescent indicator tube.
9. Each time a button is pressed, "K 0" value increases. However,
once a button is pressed, it is no longer taken into account.
When pressing the all buttons, display becomes "K10".
10. "V0" value increases "V2", "V4", "V6" "V8", "V0" if turn
the [VOLUME] knob clockwise, or it decreases "V8", "V6",
"V4", "V2", "V0" if turn the knob counterclockwise.
Releasing method:
Press two buttons of the [FUNCTION] and [
taneously for three seconds.
24
NWD version (HCD-
SBT300W/SBT300WB only)
STEREO
BTA version
STEREO
BTL version
STEREO
CD version
STEREO
CDMA version
STEREO
CDMB version
STEREO
ST version
STEREO
TA version
STEREO
TM version
STEREO
] button again, the display re-
x
TUNE −] button, "K 0 V0" is dis-
TUNE −] simul-
.
DISC TRAY LOCK MODE
It can be unable to take sample disc out of disc tray in the shop.
Procedure:
1. Press the [ / ] button to turn the power on.
? 1
2. Press the [FUNCTION] button to turn the CD function.
3. Press the [ ] button to open the disc tray and set the CD.
Z
4. Press the [ ] button to close the disc tray.
Z
5. Press two buttons of the [
seconds.
6. The message "LOCKED" is displayed on the fl uorescent indi-
cator tube and the disc tray is locked.
(Even if pressing the [
Z
is displayed on the liquid crystal display and the disc tray is
locked)
Releasing method:
1. Press two buttons of the [
seconds.
2. The message "UNLOCKED" is displayed on the fl uorescent
indicator tube and the disc tray is unlocked.
AM STEP CHANGE
(Except AEP and UK models)
It can change AM step interval into 9 kHz or 10 kHz.
Procedure:
1. Press the [ ] button to turn the power on.
?/1
2. Press the [FUNCTION] button to turn the AM function.
3. Press the [ ] button to turn the power off.
?/1
4. Press two buttons of the [FUNCTION] and [
ously.
5. The message "STEP 9" or "STEP 10" is displayed on the
fl uorescent indicator tube, and AM step interval changed.
CHECK VERSION DISPLAY
It can confi rm the MC, CD and NW version.
Procedure:
1. Press the [ ] button to turn the power on.
?/1
2. Press two buttons of the [
ously for three seconds.
3. It enters the check version display mode, the MC version is
displayed on the fl uorescent indicator tube.
4. Each time [ TUNE +] button is pressed, the display chang-
>
es CD version → NW version (HCD-SBT300W/SBT300WB
only) this order, and release from check version display mode.
] and [ ] simultaneously for fi ve
x Z
] button, the message "LOCKED"
] and [ ] simultaneously for fi ve
x Z
] simultane-
?/1
] and [BASS BOOST] simultane-
x