Ecodesign Information - Kenwood CookEasy+ CCL50 Instructions Manual

Ecodesign Information

Network Port: Single WiFi port, activated by default.
RF Frequency Range:
Maximum Transmit Power:
Communications Protocol: IEEE802.11 b, g, n
The CCL50 has a single WiFi Network Port and is intended for use as remotely
operated, network equipment.
The Network Port can be deactivated in the WiFi settings menu and selecting "Off".
The Network Port can be re-activated in the WiFi settings menu and selecting "On".
Mode
Non-Networked On – Display screen shows the time,
speed, temperature screen
Non-Networked Standby – after 20 mins of inactivity
display screen turns off.
Networked On
Display screen shows the time, speed, temperature screen.
WiFi Network Port active.
Networked Standby – after 20 mins of inactivity.
Display screen turns off, WiFi Network Port enters low
power mode.
Off - Activated by switch on rear of unit.
Measurements conditions:
Voltage input: 50Hz, 230VAC
Ambient temperature: 22 °C
Date of test: 15/01/2018
Equipment: Yokogawa WT310E
Reference commission regulation (EC) no. 1275/2008.
Reactivation: The appliance can be reactivated from standby by:
From networked standby: Touch the display screen, rotate the control dial or remotely
via the App.
From non-networked standby: Touch the display screen or rotate the control dial.
The bowl and lid should always be kept fitted to the main unit so that in can be
operated remotely.
26
TYPE CCL50
2412 - 2472 MHz
< 20 dBm
Limit CCL50
NA 2.575W
<0.5W 0.401W
NA 3.080W
<1.5W 0.895W
0.5W 0W