Overview Of Fitting Locations; Abs/Esp - Volkswagen Passat 2011 Workshop Manual

Passat 2011 ➤ , Passat Variant 2011 ➤
Brake systems - Edition 02.2014
2

Overview of fitting locations

⇒ "2.1 ABS/ESP", page 10
2.1

ABS/ESP

⇒ "2.1.1 ABS/ESP, LHD", page 10
⇒ "2.1.2 ABS/ESP, RHD", page 12
2.1.1 ABS/ESP, LHD
1 - ABS control unit - J104-
❑ Location: on the hy‐
draulic unit on right in
engine compartment.
❑ Do not separate con‐
nector before success‐
fully completing self-di‐
agnosis. Switch ignition
off before separating
connector.
❑ Must not be separated
from ABS hydraulic unit
- N55-
❑ Removing and installing
⇒ page 17 .
2 - ABS hydraulic unit - N55-
❑ Location: on right in en‐
gine compartment.
The hydraulic unit consists of
the components:
❑ Brake pressure sender -
G201-
❑ ABS hydraulic pump -
V64-
❑ Valve block (contains in‐
let and outlet valves).
❑ ABS hydraulic pump -
V64- and valve block
must not be separated
from one another.
❑ Must not be separated
from ABS control unit -
J104-
❑ Removing and installing
⇒ page 17 .
3 - Brake pad warning lamp - K32-
❑ Location: in dash panel insert.
4 - ABS warning lamp - K47-
❑ Location: in dash panel insert.
5 - ESP and TCS warning lamp - K155-
❑ Location: in dash panel insert.
6 - Brake system warning lamp - K118-
❑ Location: in dash panel insert.
10
Rep. gr.45 - Anti-lock brake system