1. Maintaining and Checking the Mechanism
1-1. Regular Checks and Maintenance Items
To obtain full function and maximum performance from the set, and to stop it getting dirty or scratched,
we recommend that you carry out the following maintenance procedures and regular checks. The mainte-
nance checks described in the following section should also be carried out without fail after carrying out
any repairs to the set.
Note: Oil and Grease
. Always use the specified brands of oil and grease. If you use a grease with the wrong viscosity, for
example, this can lead to all sorts of problems. Be careful to keep the oil and grease free of dust and
foreign bodies.
. A "drop" of oil is the amount of oil remaining on the tip of a rod with a diameter of 1. 5 mm after it is
dipped in oil to a depth of 1 cm and then taken out.
SVT-N72P (E)
Section 2
Mechanical Adjustments
2-1