HDMI IN 2 /
Note
See Connecting Cables for further information regarding cable connections.
Cable holding ring
•
Fix the cables using the holding ring, as shown in the figure.
Remote Control
Introduction
Connect the CATV cable or TV antenna cable
to the "ANT IN" port on the rear side of the prod-
uct. Make sure to use a TV antenna cable (sold
separately) as the antenna cable.
HDMI IN 2
Connect the [HDMI IN 2] terminal at the back of
your product to the HDMI terminal of your digital
output device using a HDMI cable.
Connect your headphones to the Headphone con-
nection terminal.