Samsung SCD77 Owner's Instruction Book page 74

ENGLISH
IEEE 1394 Data Transfer
System requirements
®
CPU : faster Intel Pentium III
Operating system : Windows
Main memory : more than 64 MB RAM
IEEE1394 add-on card or built in IEEE1394 card
Recording with DV connecting cable
1. Set the power switch to PLAYER mode.
2. Connect the DV cable (not supplied) to the DV IN/OUT port of the camcorder and
to the DV IN/OUT port of the other DV device.
Make sure DV IN appears on the screen.
3. Press the START/STOP button to enter the REC PAUSE mode.
PAUSE is displayed in the OSD.
4. Start playback on the other DV device while you monitor the picture.
5. Press the START/STOP button to start recording.
If you want to pause recording for a while, press the START/STOP button again.
6. To stop recording, press the
Note When making recordings on the camcorder, the picture on the LCD or a TV monitor may occasionally
be uneven. Recorded pictures are not affected.
70
TM 450Mhz compatible
®
98SE, ME, Mac OS
(STOP) button.
(Not Supplied)
6Pin 4Pin
IN/OUT (Not Supplied)
DV port linking diagram