If The "-" Indicator Is Blinking In The Gear Position Window While Riding - Honda CTX700N 2014 Owner's Manual

If the "-" Indicator is Blinking in the Gear Position Window While Riding

(CTX700ND only)
If the "-" indicator is blinking while riding,
you may have a serious problem with the
Dual Clutch Transmission system.
Park your motorcycle in a safe place and have
your motorcycle inspected by a dealer
immediately.
There is a possibility for you to ride yourself
to a dealer, if you follow the procedure
below.
1. Turn the ignition switch to OFF.
2. Turn the ignition switch to ON and start
the engine.
If you cannot start the engine:
Turn the ignition switch to OFF and move the
motorcycle back and forth slightly (to
disengage the gears).
Turn the ignition switch to ON again and
start the engine.
104
If you still cannot start the engine:
Start the engine while applying the front or
rear brake lever.
If you can shift from N to D mode:
When a gear position is shown in the gear
position indicator, you can ride in that gear.
Take your motorcycle to your dealer riding at
a safe speed.
If you can't shift from N to D mode and the "-"
indicator is blinking:
Damage is preventing you from riding. Have
your motorcycle inspected by your dealer
immediately.