Samsung SAMSUNG_SL420 User Manual page 36

Self-timer ( ) / Right button
Selecting the self-timer
1. Select a Recording mode with the
exception of Voice recording mode.(p.20)
2. Press the SELF-TIMER / RIGHT (
button until the desired mode indicator
displays on the LCD monitor. A 10 second,
2 second, Double self-timer or Motion timer
icon appears on the LCD monitor.
3. When you press the SHUTTER button,
the picture will be taken after the
specified time has elapsed.
Self-timer mode indicator
Icon Mode
10SEC Pressing the shutter button will allow an interval of
self-timer 10 seconds before the image is taken.
2SEC Pressing the shutter button will allow an interval of
self-timer 2 seconds before the image is taken.
A picture will be taken after about 10 seconds and
2 seconds later a second picture will be taken.
Double
When using the flash, the 2-second
self-timer
self-timer may be delayed for longer than 2 sec-
onds depending on the flash charging time.
The camera detects the subject's movement 6
Motion
seconds after pressing the Shutter button, and the
Timer
picture is taken when the movement is stopped.
)
[Selecting the 10 SEC
self-timer]
Description
Motion Timer
Motion
Pressing the Shuter button after
setting the Motion Timer
Detecting the subject's movement
No movement is detected
The Motion Timer flows are as followings. (Movie Clip mode excluded)
Selecting the Motion Timer
Confirming the composition (Within 6 sec.)
tion (Swing your hands fully)
(Do not move) Taking an image (after 2 sec.)
*1: The camera detects the subject's movement 6 seconds after pressing the
Shtter button, so confirm the composition within 6 seconds.
*2: Move your body or hands fully.
In the following cases, the Motion Timer may not operate.
The focus distance is over 3m.
The exposure is too bright or dark
In backlight conditions.
The movement is insignificant
The movement is detected beyond
the center part (50%) of the sensor
where the movement is recognized.
If the camera doesn`t sense any
movement for 30 seconds, or the
camera doesn't sense stillness after
sensing movement
Icon & Self-timer lamp
Blink (1 second interval)
Blink (0.25 second interval)
Turn on and the image is taken
after 2 seconds
Pressing the Shutter button
*1
Starting the detec-
*2
Stopping the detection
The detection range of
Motion Timer
035