Memorizing the Channels
Selecting the Video Signal-source
This feature allows you to manually set the DVD-VCR's tuner band to Antenna or Cable, whichever you
connected to the Antenna In jack during initial setup.
1
Press the MENU button.
2
Press the .../† buttons to
select Setup, then press the √
or ENTER button.
3
Press the .../† buttons to
select Channel, then press the
√ or ENTER button.
4
Press the √ or ENTER button
to select Antenna or Cable
TV.
I
S
N I T I A L
E T U P
- Antenna: Select this if the DVD-VCR
is connected to an indoor or outdoor
VHF/UHF antenna.
- Cable TV: Select this if the DVD-VCR
is connected to Cable TV.
ENG-24