Connecting A Second Vcr To Record From The Tv; Connecting A Vcr - Samsung HC-R4245W Quick Setup Manual

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV
system (according to the instructions on pages 14~17). Skip step 1 if you have not yet connected to
an antenna or a cable system.
Connect a coaxial cable between the
1
"ANT 1 IN (Air)" (or "ANT 2 IN (Cable)")
terminal on the TV and the antenna out
terminal on the VCR.
A coaxial cable is usually included with a
VCR. (If not, check your local electronics
store).
Connect a set of audio cables between
2
the "AV IN 1 (L, R)" (or "AV IN 2 (L, R)")
jacks on the TV and AUDIO OUT jacks on
the VCR.
If you have a mono VCR, connect
L(mono) to VCR audio out using only one
audio cable.
Connect a video cable between the "AV
3
IN 1 (VIDEO)" (or "AV IN 2 (VIDEO)") jack
on the TV and the VIDEO OUT jack on
the VCR.
Follow the instructions in "Viewing a VCR
or Camcorder Tape" to view your VCR
tape.
• Also, you can connect to "AV 3" on the side panel of TV.

Connecting a Second VCR to Record from the TV

Your TV can send out signals of its picture and sound to be recorded by a second VCR. To do this,
connect your second VCR as follows:
Connect a set of audio cables between
1
the "AV OUT (L, R)" jacks on the TV and
the AUDIO IN jacks on the VCR.
(The VCR input jacks might be either on
the front or rear of the VCR.)
Connect a video cable between the "AV
2
OUT (VIDEO)" jack on the TV and the
VIDEO IN jack on the VCR.
Refer to your VCR's instructions for more
information about how to record using this
kind of connection.
From Cable
Coaxial Cable
1
From Antenna
Audio Cable
Coaxial Cable
From Antenna
English-5
TV Rear Panel
2
Audio Cable
VCR Rear Panel
TV Rear Panel
From Cable
Video
1
Cable
VCR Rear Panel
Video
Cable
3
2