Menu Navigation; Data Entry - Garmin GI 275 Installation Manual

1.7.6

MENU NAVIGATION

Various menu items may be located under other menu items. It may be necessary to go through a few
levels of intuitively organized menus to access desired functionality.
Selecting a menu item:
1. From the menu, scroll (up and down on most configurations, side-to-side on units configured as
primary ADI, HSI, or EIS) to find the desired button.
2. Touch the desired button to select or toggle the highlighted item.
Or:
1. Turn the Outer Knob to move the selection highlight and scroll through the menu.
2. Push the Inner Knob to select or toggle the highlighted item.
1.7.7

DATA ENTRY

Data can be entered by using the touchscreen or knobs.
Entering data:
1. Select a Datafield Button. The keypad is displayed.
2. Touch the desired letters and/or numbers.
3. To enter a negative number, first input the positive value. Then, touch the +/- Button to toggle the
negative sign.
4. Touch the Enter Button to save input.
Or:
1. With the keypad displayed, turn the Inner Knob to activate the cursor and enter the first letter and/
or number. Turn the Inner Knob clockwise to increase and counterclockwise to decrease.
2. Turn the Outer Knob to move the cursor to the next character position (if applicable).
3. Repeat steps as necessary.
4. Push the Inner Knob to save input.
Or:
1. Highlight a numerical Datafield with the Outer Knob.
2. Turn the Inner Knob clockwise to increase the numerical value, or counterclockwise to decrease
the numerical value.
Entered
Button
Keypad
190-02246-00
Rev. 1
data
Back
Figure 1-6 Data Entry
Backspace
Button
Enter
Button
GI 275 Installation Manual
Page 1-30