Set Fdn Mode; Change Phone Password; Change Pin Code; Change Pin2 Code - Samsung SGH-S390G User Manual

Set FDN Mode

FDN (Fixed Dial Number) mode, if supported by your SIM card, allows you to restrict
the outgoing calls to a limited set of phone numbers. The following options are
available:
– On: you can only call phone numbers stored in the FDN contacts list. You must enter your
PIN2. The following options for entering FDN contacts are available through the Address
Book:
• Full length entries or wild cards can be entered in to the FDN list.
• A full length number with a specific contact name can be entered into the FDN list.
• Wildcard entries allow you to dial a range of number with a single entry: ex. 555 – All
dialed numbers that begin with 555 are allowed. Numbers that do not match the
conditions in the FDN list are restricted.
– Off: you can call any number.
Note: Entering an asterisk (*) is not required for wild card entries.

Change Phone Password

This option allows you to change your current phone password to a new one. Once
you enter a new password, you are asked to confirm it by entering it again.

Change PIN Code

This option allows you to change your current PIN, provided that the PIN Check
feature is enabled. You must enter the current PIN before you can specify a new
one. Once you enter a new PIN, you are asked to confirm it by entering it again.

Change PIN2 Code

The Change PIN2 option allows you to change your current PIN2 to a new one. You
must enter the current PIN2 before you can specify a new one. Once you enter a
new PIN2, you are asked to confirm it by entering it again.
Note: If your SIM card does not require a PIN2 password, this menu does not display.
Changing Your Settings 99