Adapt Digits; Reset Digits - Samsung SCHU520 User Manual

Adapt Digits

To adapt digit dialing, do the following:
In standby mode, press the Menu (left) soft key (
1.
(for Voice SVC),
following options appear in the display:
• Adapt Digits

• Reset Digits

Use the navigation keys to highlight Adapt Digits, then press the
2.
Your phone displays text describing the Adapt Digits process.
Press the
3.
"Please say" plays through the speaker followed by the four digits
appearing in the display.
Wait for the beep and say the digits using your normal tone of voice. After a
4.
moment, the phone plays back the recording and prompts "Did the
recording sound ok?"
• If the recording was good, say "Yes."
• If you need to re-record, say "No."
If you say "No," the phone prompts you to pronounce the digits again. Wait
for the beep and then say the digits.
Repeat this step until you're satisfied with the recording.
After confirming that the recording sounds "ok", continue the recording
5.
process with the next set of digits.
After 10 sets of digits, the phone asks whether you want to do more
6.
adaptation. Answer "Yes."
Repeat steps 4 and 5 for another 10 sets of digits. After the second group
7.
of 10 sets of digits, "Adaptation complete" plays through the speaker and
you are returned to the Digit Dialing menu.
Reset Digits
To reset digit dialing to factory default settings, do the following:
In standby mode, press the Menu (left) soft key (
1.
(for Voice SVC),
The following options appear in the display:
• Adapt Digits
• Reset Digits
(for Voice Settings), and
key.
Your phone displays the first digit sequence and
OK
(for Voice Settings), and
Voice Settings
), then press
for Digit Dialing. The
key
OK
), then press
for Digit Dialing.
Voice SVC 117
.