Voice Svc Options; Voice Commands - Samsung SCHU520 User Manual

Voice SVC Options

Your SCH-u520 includes VoiceSignal, state-of-the-art voice recognition software that
lets you use your voice to dial numbers, access your Contacts list, and open Tools. To
access your phone's voice recognition, do the following:
In standby mode, press the Menu (left) soft key (
1.
for Voice SVC. The following options appear in the display:
• Voice Commands — Lets you place calls, access your Contacts List, review
your appointments, and more by speaking commands into your phone. Also see
"Voice Dialing" on page 25 and "Voice Method" on page 51 for more
information.
• Voice Settings — Lets you tailor VoiceSignal to better respond to your voice
and your phone use preferences.
See "Digit Dialing" on page 116 for more information.
Use the navigation keys to highlight the desired sub-menu, then press
2.
key
.
OK

Voice Commands

To access the Voice Commands menu, do one of the following:
In standby mode, press and hold the
•
"Say a Command" appears in the display and is pronounced through the
earpiece, followed by a list of available commands.
In standby mode, press the Menu (left) soft key (
•
Voice SVC) and
Note: You can also set your phone to start VoiceSignal when you open the phone. See "Voice Launch" on
page 118 for more information.
The following voice commands appear in the display:
Call — Lets you dial the phone by saying any name stored in your contact list,
•
without ever having to record, or "train" that name. VoiceSignal automatically
voice-activates all your contacts, even if you have hundreds of them stored on
your phone. You can also dial any telephone number, even if it is not stored in your
contact list, by saying the digits in the number. (See "Voice Dialing" on page 25 for
more information.)
Send Text — Lets you access Create Text Message.
•
Send Picture — Lets you access Create Picture Message.
•
Lookup — Lets you find a Contact by name and review the Contact's information.
•
114
for Voice Commands.
@
) )
), then press
key.
), then press
the
(for