Entering Symbols
Symbol mode enables you to enter symbols such as @ or % in a text message.
In standby mode, press the Message shortcut (Up navigation) key, then
1.
press
new text message.
Enter the phone number of the recipient, then press the
2.
Press the Left soft key (
3.
options appears in the display:
• T9 Word
• Abc
• ABC
• 123
• Symbols
Use the Up and Down navigation keys to highlight Symbols, then press the
4.
key. The first of three screens of symbols appears in the display.
Use the Prev (left) soft key (
5.
to page through the other symbols, if necessary.
Press the key that corresponds with the symbol that you wish to enter. For
6.
example, press
Note: You can also use the navigation keys to highlight the desired symbol and then press the
enter the selected symbol into your message.
Repeat steps 3 through 6 to insert as many symbols into your message as
7.
desired.
45
(for Send Message) and
). A pop-up menu containing the following
for an exclamation point (!).
ghi
for Text Message to compose a
) and the Next (right) soft key (
key.
)
key to