Vibrate Mode - Samsung SCHR500 User Manual

When you end a call, your phone automatically drops out of Speakerphone mode.
In Speakerphone mode, press and hold the Speakerphone key (
to using the earpiece.

Vibrate Mode

Silence all tones your phone makes and replace them with vibrations.
In standby mode, repeatedly press and the Down volume key (
Vibrate appears in the display.
The volume key is on the upper left side of phone, near the upper left soft
corner of the display.
Adjust the Ringer
In standby mode, press the Volume key ( ) on the left side of the phone up
1.
or down. Options are:
• Ringer Off
• Vibrate
• Low
• Low/Medium
When you are satisfied with the setting, press the SET key (
2.
phone returns to standby mode.
Tip: You can also access the Volume-Voice Calls sub-menu by pressing the MENU key (
pressing the ,
wxyz def
left side of your phone) to adjust the ringer volume setting.
Note: The Vibrate icon (
19
,
, and keys. Use the Navigation key or the Volume key (on the upper
) appears in the display when the phone is in Vibrate mode.
• Medium
• Medium/High
• High
• Vibrate/High
) to switch back
) until
). Your
), then