Samsung SCHI100 User Manual page 96

Scroll down to the Network Settings and touch Advanced to
2.
see the following options:
• Wi-Fi sleep policy: Specify when to switch from Wi-Fi to mobile
data for data communications. This setting can affect the behavior
of devices you connect to your phone, such as when tethering or
using 3G Mobile Hotspot. The Wi-Fi sleep policy options include:
– When screen turns off
– Never when plugged in
– Never
• MAC address: View your phone's MAC address, needed for
connecting to some secured networks (not configurable).
• Proxy: Touch to enter a proxy number.
• Port: Touch to enter a port number.
• IP Settings: Enable a Static IP address, and manually configure its
settings:
– Use static IP: Touch to use a static IP. When enabled, a check mark
appears in the checkbox.
– IP address: When using a static IP, enter the IP address.
– Gateway: When using a static IP, enter the Gateway.
– Netmask: When using a static IP, enter the Netmask.
– DNS 1: When using a static IP, enter the DNS 1 value.
– DNS 2: When using a static IP, enter the DNS 2 value.
92
Portable Wi-Fi Hotspot
Use Portable Wi-Fi Hotspot to share your phone's internet
connection with a PC or other device through Wi-Fi.
Note: To use Portable Wi-Fi Hotspot, you need the Portable Wi-Fi Hotspot
feature from your wirelesss provider. Contact your wireless provider
for more information.
Portable Wi-Fi Hotspot consumes battery power and uses data service.
While the Portable Wi-Fi Hotspot is active, your phone's applications
will use the Portable Wi-Fi Hotspot data feature allowance.
Portable Wi-Fi Hotspot On or Off
From the Settings screen, touch Wireless & networks
1.
Portable Wi-Fi Hotspot.
Touch Portable Wi-Fi Hotspot to turn Portable Wi-Fi Hotspot
2.
On or Off. When on, a check appears in the checkbox.
Note: Using your phone as a mobile hotspot consumes battery power and
increases your data usage. Roaming while using your phone as a
mobile hotspot will incur extra data charges.