Table of Contents
Advertisement
3. Press
1
@
in the display:
Disable — The phone remains unlocked.
Enable on Power Up — The phone locks automatically the
next time your phone is powered on and stays locked until you
enter the lock code.
Enable Always — The phone locks immediately and stays
locked until you enter the lock code.
4. Use the navigation keys to highlight the Lock Phone
option of your choice.
5. Press
OK
option.
Important! If you change the NAM1 setting after setting the phone to lock
upon power-up and did not program a number into NAM2, you won't be
able to access your phone. You must call the Service Center to unlock your
phone.
Change Lock
The default lock code is generally the last four digits of
your phone number. It is advisable to change the
default lock code to a secret code for security purposes.
1. In standby mode, press the MENU (left) soft key (
then press
The Lock prompt appears in the display.
2. Enter the four-digit lock code using the keypad.
Note: The default lock code is the last four digits of your mobile phone
number.
The Lock prompt disappears and the Security menu
appears in the display.
190
for Lock Phone. The following options appear
)
)
to perform the function for the highlighted
(for Setup) and
9
wxyz
for Security.
3
def
),
Advertisement
Table of Contents
