Table of Contents
Advertisement
Taking Pictures
Taking pictures with the built-in camera is as simple as
choosing a subject, pointing the lens [located on the
outside of the folder (above the external display)], and
pressing a button.
Simple Snap Shot
To take a single picture using the current camera
settings, do the following:
1. In standby mode, press and hold a camera key:
The message "Camera Starting..." followed by a
camera view finder screen appears in the display. (See
"Camera Screen" on page 141 for more information.)
Note: You can also activate the camera by pressing the MENU (left) soft
key(
), then press
2. Point the camera at your subject.
3. Using the display as a viewfinder, press the
when the image that you wish to capture appears in the
display.
4. Press the Save (right) soft key (
to memory.
5. Press the Erase (left) soft key (
Tip: You can change a number of the camera's settings to suit particular
uses for your pictures. See "Camera Settings" on page 152 for more
information.
140
(on the keypad)
(on the right side of the phone)
(for Camera) and
7
pqrs
for Take a Picture.
1
@
)
)
OK
) to save the picture
) to erase the photo.
key
Advertisement
Table of Contents
