Advertisement
4. operAtion
4.1.
Assemble the torque multiplier as in fig.1.
4.2.
Place the multiplier onto the first of the wheel nuts to be undone as shown in fig.2(A).
4.3.
When turning a nut clockwise the reaction leg will react in an anti-clockwise direction and vice-versa. the reaction leg must be butted up
against a solid object (adjacent wheel nut, wheel rim or hub) to resist the rotation of the leg as in fig.2(B).
note: some commercial vehicles may have left hand threads on wheel studs and nuts; check which direction is required.
4.4.
to spin a loose nut in either direction quickly use the speed winder shown in fig.1.
4.5.
the final tightening of the wheel nuts should be carried out using a suitable torque wrench set to the recommended values shown in the
manufacturer's handbook.
fig.2
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
when the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
importAnt: no liability is accepted for incorrect use of this product.
wArrAntY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack sealey limited
environmental protection
sole uK distributor, sealey Group.
Kempson Way, suffolk Business Park,
Bury st. edmunds, suffolk.
iP32 7Ar
Original Language Version
01284 757500
01284 703534
sX500.V2 | issue 1 28/02/17
www.sealey.co.uk
web
sales@sealey.co.uk
Advertisement
