ADT Security Manager 3000 User Manual page 42

THIS SECTION APPLIES ONLY TO RESIDENTIAL SYSTEMS
Manually 1. Should you become aware of a fire emergency before your smoke or
Initiating
a Fire Alarm
2. Evacuate all occupants from the premises.
3. If flames and/or smoke are present, leave the premises and notify
4.
Using the Panic
Key(s) Assigned
for FIRE
Emergency
DISPLAYS FOLLOWING MANUAL INITIATION OF A FIRE ALARM
– 42 –
heat detectors sense the problem, go to your nearest touchpad and
manually initiate an alarm by pressing the panic key assigned for
FIRE emergency for 2 seconds. If a key pair has been assigned for
fire, press both keys at the same time. Check on the next page and in
the Panic Keys section on page 34 for further details.
your local Fire Department immediately.
If no flames or smoke are apparent, investigate the cause of the
alarm. The zone number(s) of the zone(s) in an alarm condition will
be displayed at the touchpad.
A key or key pair may have been assigned for manually initiating a
FIRE alarm. See the Panic Keys section on page 34 for key
assignments.
For convenience, indicate the key or key pair assigned for fire below.
In divi dua l Ke ys
A B C
seconds.
O R
Key Pai rs
1
and
O F F
and
R E A D Y
3
and
S T A Y
CUSTOM DISPLAY TOUCHPAD
Press
the individual key assigned for fire
R E A D Y
Press
#
for fire
#
ALARM
FIRE
ENGLISH DISPLAY TOUCHPAD
for 2
the key pair assigned
at the same time.
AC