Table of Contents
Advertisement
Tap a device name to pair with the device.
2.
Important!: Some Bluetooth devices are secured and require a PIN number to
confirm and pair with them.
Enter a PIN to pair with the device, if one is required, and
3.
tap OK.
USB Utilities
Press
1.
utilities
Connect storage to PC.
If prompted, tap OK to turn USB debugging mode off.
2.
Plug in a compatible USB cable to begin using the device
3.
for mass storage mode.
Tethering
This option allows you to share your phone's mobile data
connection via a direct USB connection between your phone and
computer. A wireless version of this same functionality would be
the Mobile AP feature.
Note: You can not mount your phone's microSD card to your computer while
using the USB tethering feature. If additional software or USB drivers
are required, navigate to:
.
downloads
and then tap
(Settings)
http://www.samsung.com/us/support/
Press
Wireless and network
For more information, refer to "Tethering" on page 195.
Mobile AP
This feature allows you to turn your phone into a Wi-Fi hotspot.
The feature works best when used in conjunction with HSPA+
(4G) data services (although 3G service can also be used).
USB
Important!: The Mobile AP service can not be active at the same time as
Wi-Fi. Please close your Wi-Fi connection prior to launching the
Mobile AP service.
For more information, refer to "Portable Wi-Fi Hotspot" on
page 196.
VPN settings
The VPN settings menu allows you to set up and manage Virtual
Private Networks (VPNs).
Important!: Before you can use a VPN you must establish and configure one.
and then tap
(Settings)
Tethering and portable hotspot.
Changing Your Settings
206
Advertisement
Table of Contents
