Bluetooth Settings; Usb Utilities; Tethering - Samsung Galaxy S II Epic 4G Touch User Manual

To turn 4G off:
1. Press
2. Tap 4G to remove the green checkmark and deactivate 4G services.
Note: Use of 4G communication and Sprint Mobile Hot Spot service can cause an added drain
to your battery and reduce your battery use times.
or
1. Touch and hold the Status bar and slide your finger down the screen.
2. Tap the onscreen 4G icon to turn off the service (turns gray when disabled).

Bluetooth Settings

Your device's Bluetooth capabilities let you use wireless headsets, send and receive pictures
and files, and more. For details on your device's Bluetooth settings, see
Menu.

USB Utilities

This option allows you to copy files between your PC and the memory card in your phone.
1. Press
2. Tap Connect storage to PC.
3. From your PC, open the folder to view your files.
4. Copy files between your PC and the memory card.

Tethering

Tethered Mode allows your computer to obtain an external data connection by using the
device's wireless data services and a wired USB connection. Tap USB tethering to activate
tethering mode.
Important: If you are using your device for Tethering, you may be prompted for additional
drivers. The Samsung Mobile Driver for SPH-D710 contains the ADB, CDMA, &
WiMAX drivers that are required for using either Tethering (Phone as a Modem)
or development tools.
Go to www.samsung.com

to the Download Center
The online FAQ also provide detailed information about this driver.

A wireless data connection can be done by using the device's Sprint Hotspot feature.

Device Settings
> and tap
> and tap
and visit the D710 Product page, where you can navigate
to obtain this driver.
> Wireless and network > 4G settings.
> Wireless and network > USB utilities.
47
The Bluetooth Settings