Selection And Inspection Of Tires - Komatsu WA470-5H Operation & Maintenance Manual

MAINTENANCE

SELECTION AND INSPECTION OF TIRES

If a tire or a rim is handled wrongly, the tire may burst or
may be damaged and the rim may be broken and scat-
tered, and that can cause serious injury and death.
! Since maintenance, disassembly, repair and assembly
of the tires and rims require special equipment and
skill, be sure to ask a tire repair shop to carry out the
work.
! Do not heat or weld the rim to which the tire is
installed. Do not make a fire near the tire.
SELECTION OF TIRES
Select the tires according to the conditions of use and attachments on the machine. Use only specified
tires and inflate them to the specified pressure.
Select the tires according to the conditions of use and attachments of the machine. Use the following table.
Since the indicated speed varies with the tire size, consult your Komatsu distributor when using optional tires.
Front wheel
Standard
Rear wheel
Front wheel
Rear wheel
If equipped
Front wheel
Rear wheel
WARNING
Maximum load [kg (lb)]
10,760 (23726)
10,760 (23726)
11,140 (24564)
11,140 (24564)
12,690 (27981)
11,140 (24564)
WARNING
Tire size
23.5-25-20PR (L3 Rock)
23.5-25-20PR (L3 Rock)
26.5-25-16PR (L3 Rock)
26.5-25-16PR (L3 Rock)
26.5-25-20PR (L3 Rock)
26.5-25-20PR (L3 Rock)
SERVICE PROCEDURE
0.
0.
Remarks
4-35