Table of Contents
Advertisement
8. Other Functions
8.
Other Functions
8.1 Individual Execution
After connections with the ICDminis are established by clicking on the [ICDmini Connect] button, entering an
index number from the keyboard (ten keyboard can also be used) executes programming of only the target system
specified by the index number.
8.2 Selecting a Process
The check boxes in the each target system field, that correspond to the RESET, ERASE, WRITE, and VERIFY
processes from the top, can be used to select the processes to be executed. Selecting a check box will execute the
process and clearing a check box skips the process.
Example: Setting to execute the RESET and VERIFY processes in the target system index number 0
1
2
Figure 8.2.1 Selecting Execution Processes Individually
The check box settings are saved and will also be effective at the next time Gang Writer starts up.
8.3 Counter Function
The PASS, FAILURE, and TOTAL fields in the Gang Writer window show the counts of programming succeeded,
failed, and the total of them, respectively. Clicking on the [RESET COUNTER] button clears these counters to 0.
Figure 8.3.1 Counter Display
24
Seiko Epson Corporation
S5U1C17001Y23 Multi-Programmer
System Manual (Rev. 1.1)
Advertisement
Table of Contents
