Table of Contents
Advertisement
Airing Your Room
14
E-
If the atmosphere in your room is stale, you can air it using the FAN
feature.
1
If necessary, press
Result:
The On/Off indicator on the function controller
comes on.
The air conditioner runs in the mode selected
when the unit was last used.
Caution
The air conditioner is fitted with a protection
mechanism to prevent the unit from being damaged
when it is started immediately after being:
Plugged in
Stopped
lt will start up normally after three minutes.
2
To select the FAN mode, press the Mode button until
displayed at the top of the function controller.
Result:
The air conditioner runs in FAN mode.
Note
You can change modes at any time.
3
Select the fan speed by pressing the Fan button one or more
times until the intended value is displayed :
Low
Medium
High
4
To control the direction of the air flow, refer to page 15.
(ON/OFF) button.
is
Advertisement
Table of Contents
