Connecting MindConnect Elements
5.1 Commissioning MindConnect Element
4. Power on the power supply.
– For MindConnect Nano, set the on/off switch to position "I" (ON). The "PC ON/WD"
– For MindConnect IoT2040, switch on the power supply. The graphic shows the "PWR"
Result
MindConnect Nano/IoT2040 is now prepared and you can onboard it to MindSphere.
If the green light does not appear, refer to section Troubleshooting (Page 26) for more
information about LED messages.
34
LED lights up green.
LED lights up green.
Figure 5-3
Power on a power supply for MindConnect IoT2040
Getting Connected to MindSphere
Getting Started, 05/2018