Texas Instruments OMAP35 DVEVM Series Getting Started Manual page 58

Document OMAP35x DVEVM Getting Started Guide
Document Number SPRUFZ7
C64P.rootDir=java.lang.System.getenv("CODEGEN_INSTALL_DIR");
cd /home/<useracct>/dvsdk_#_##_##_##/cs1omap3530_#_##_##
host $ make clean
host $ make
The rebuilt
/home/<useracct>/dvsdk_#_##_##_##/cs1omap3530_#_##_##/packages/ti/sdo/server/bin directory and
is named cs.x64P.
The DSP side server executables can also be built from the DVSDK installation directory itself by
following the below commands.
Ensure that DSP side code generation tools are set properly in the Rules.make in DVSDK installation
directory
CODEGEN_INSTALL_DIR=/home/<useracct>/dvsdk_#_##_##_##/cg6x_#_#_##
Re-building the Servers from DVSDK installation directory can be done using the following commands.
host $ cd /home/<useracct>/dvsdk_#_##_##_##
host $ make codecs_clean
host $ make codecs
host $ make install
server executable
Rev
Date
can be
58
3.0
Sept 23, 2009
found in the