Hyundai IONIQ Electric Owner's Manual page 173

There are some conditions that can
cause changes to the vehicle mag-
nets, such as installing a ski rack or
a CB antenna. Body repair work on
the vehicle can also cause changes
to the vehicle's magnetic field. In
these situations, the compass will
need to be re-calibrated to quickly
correct these changes.
If you need to recalibrate the com-
pass:
1. Press and hold the
more than 6 seconds. When the
compass memory is cleared a "C"
will appear in the display.
2. Drive the vehicle in 2 complete cir-
cles at less than 8 km/h (5 mph).
Integrated HomeLink
Control System
The HomeLink
System can replace up to three hand-
held radio-frequency (RF) transmit-
ters with a single built-in device. This
innovative feature will learn the radio
frequency codes of most current
transmitters to operate devices such
as gate operators, garage door open-
ers, entry door locks, security sys-
tems, even home lighting. Both stan-
dard and rolling code-equipped trans-
button for
mitters can be programmed by fol-
lowing the outlined procedures.
Additional HomeLink
can be found at: www.homelink.com
or by calling 1-800-355-3515.
Retain the original transmitter of the
RF device you are programming for
use in other vehicles as well as for
future HomeLink
also suggested that upon the sale of
the vehicle,
HomeLink ® buttons be erased for
security purposes.
®
Wireless
® Wireless Control
Before
HomeLink
opener or gate operator, make
sure people and objects are out
of the way of the device to pre-
vent potential harm or damage.
Do not use the HomeLink
any garage door opener that
lacks the safety stop and
reverse features required by
federal safety standards (this
includes any garage door open-
er model manufactured before
® information
April 1, 1982). A garage door
that cannot detect an object -
signaling the door to stop and
reverse - does not meet current
federal safety standards. Using
a garage door opener without
these features increases the
® programming. It is
risk of serious injury or death.
the programmed
WARNING
programming
® to a garage door
®
with
3-23
3