Digital Multimeter (Dmm); Ni Mydaq Software Overview; Ni Elvismx Driver Software; Ni Labview And Ni Elvismx Express Vis - National Instruments myDAQ 195509D-01L User Manual And Specifications

Table of Contents

Advertisement

Digital Multimeter (DMM)

NI myDAQ Software Overview

NI ELVISmx Driver Software

NI LabVIEW and NI ELVISmx Express VIs

NI ELVISmx supports LabVIEW (32 bit). To use NI ELVISmx with LabVIEW on
Note
a 64-bit operating system, you must have LabVIEW (32 bit) installed.
© National Instruments Corporation
For example, if you use 50 mA on +5 V, 2 mA on +15 V, 1 mA on –15 V,
use four DIO lines to drive LEDs at 3 mA each, and have a 1 mA load on
each AO channel, the total output power consumption is:
5 V  50 mA = 250 mW
|+15 V|  2 mA = 30 mW
|–15 V|  1 mA = 15 mW
3.3 V  3 mA  4 = 39.6 mW
15 V  1 mA  2 = 30 mW
Total output power consumption = 250 mW + 30 mW + 15 mW +
39.6 mW + 30 mW = 364.6 mW
The NI myDAQ DMM provides the functions for measuring voltage
(DC and AC), current (DC and AC), resistance, and diode voltage drop.
DMM measurements are software-timed, so update rates are affected by the
load on the computer and USB activity.
NI ELVISmx is the driver software that supports NI myDAQ.
NI ELVISmx uses LabVIEW-based software instruments to control the
NI myDAQ device, providing the functionality of a suite of common
laboratory instruments. Refer to the
Panel (SFP) Instruments
of measurement instruments.
NI ELVISmx is located on your driver software installation media included
in the NI myDAQ kit, or can be found by searching for
Drivers and Updates page at
of NI ELVISmx software support required for your version of LabVIEW,
go to
and enter the Info Code
ni.com/info
Also installed with NI ELVISmx are the LabVIEW Express VIs, which use
NI ELVISmx software instruments to program NI myDAQ with more
enhanced functionality. For more information on the NI ELVISmx Express
VIs, refer to the
Using NI myDAQ with LabVIEW
Using NI myDAQ with Soft Front
section for information on the NI ELVISmx suite
ni.com/drivers
7
NI myDAQ User Guide and Specifications
on the
ELVISmx
. To determine the version
.
ELVISmxsoftware
section.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mydaq 195509e-01l

Table of Contents