Filter Cleaning; Bather Load - Coleman 37 jets legend Owner's Manual

Filter Cleaning

The filter is the part of your spa that removes the debris from the water and needs to be cleaned on a regular
basis to maximize your spa's filtering performance and heating efficiency.
In addition to spraying off the filter weekly to remove surface debris, your filter should be deep cleaned
periodically to dissolve scale and particles that get lodged deep within the filter fibers and impede the
filtration process. Even if the filter looks clean, scale and particles can clog the fibers and prevent water from
flowing through the filter resulting in the most common spa problem—no heat, caused by a dirty filter.
We recommend you clean your filter once a month and replace it once a year or as necessary.
1. Remove the filter by turning it counterclockwise, unscrewing the bottom threads, then pulling it up and
out.
2. Place the dirty filter into a bucket of water deep enough to cover the filter. Add 8 oz of a "Liquid Filter
Cleaner" to the bucket of water.
Note: It is a good idea to keep a spare filter to use in the spa while the dirty filter is being deep cleaned.
This way, you can rotate the filters and both will last longer.
3. Soak the filter for a minimum of 24 hours.
4. Spray the filter with a water hose. Spray each pleat carefully.
5. Reinstall the filter. Do not overtighten.

Bather Load

"Bather Load" is the term used to describe the number
of people using a spa, combined with the length of
usage, and the frequency of usage. All these factors
have a great effect on the spa water. The higher the
bather load, the more chemicals need to be added
and a longer filtration time will be needed.
All versions of the Clear Water Plan are designed for
spas with average bather load (3 to 4 people, 15
minutes of usage, three times a week at 100 degrees).
Coleman Spas
®
LTR50001090, Rev. D
If your bather load exceeds these guidelines, and
you experience water quality problems, increase
the amount of filtration first, (go to the next higher
filtration number) then if water quality is still not
adequate, consult the advice of your Coleman
for additional chemical or system recommendations.
Be sure to give them your bather load information.
23
dealer
®
Coleman logo (white)
<----------