Washing Clothes Using The Cycle Selector - Samsung WF1602W5C/YLE User Manual

Table of Contents

Advertisement

Available languages

Available languages

washing a load of laundry
5. Press the Start/Pause button.
Press the Start/Pause button to start the wash.
The amount of the laundry is automatically detected and the laundry is washed.
Once a washing machine operation begins, you cannot add or select the bubble function.

Washing clothes using the cycle selector

Your new washing machine makes washing clothes easy, using Samsung's "Fuzzy Control"
automatic control system. When you select a wash program, the machine will set the correct
temperature, washing time, and washing speed.
1. Turn on your sink's water tap.
2. Press the Power button.
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling it.
5. Close the door.
6. Add detergent, softener, and pre-wash detergent (if necessary) into the appropriate
compartments.
Pre-wash is only available when selecting the Cotton, Synthetics, Denim, Bedding, Dark
Garment, Daily Wash and Baby Care cycles. It is only necessary if your clothing is heavily
soiled.
7. Use the Cycle Selector to select the appropriate cycle according to the type of material:
Cotton, Synthetics, Denim, Bedding, Dark Garment, Daily Wash, Super Eco Wash, Outdoor
Care, Baby Care, Wool, Hand Wash. The relevant indicators will illuminate on the control
panel.
8. At this time, you can control the wash temperature, the amount of rinses, the spinning
speed, and the delay time by pressing the appropriate option button.
9. Press the Start/Pause button and the wash will begin. The process indicator will light up
and the remaining time for the cycle will appear in the display.
Pause Option
Within 5 minutes of starting a wash, it is possible to add/remove laundry items.
1. Press the Start/Pause button to unlock the door.
The door cannot be opened when the water is too HOT or the water level is too HIGH.
2. After closing the door, press the Start/Pause button to restart the wash.
When the cycle is finished:
After the total cycle has finished, the power will turn off automatically.
1. Open the door.
2. Remove laundry.
26_ washing a load of laundry
WF1602W5-03013C_EN.indd 26
Enough bubbles are generated with the specified amount of detergent.
Please clean the Debris filter frequently. Periodic cleaning helps generate sufficient
bubbles.
Depending on the detergent and the laundry, the bubbles may be absorbed and seem
like a small quantity.
Although bubbles are generated once the wash begins, it may take several minutes for
users to see them.
2011-5-23 15:34:23

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents