Advertisement
STEP
Confirm Modem is Online
•
Wait until the "Online" LED is solid green.
•
This may take up to 10 minutes.
Note: If the DS and US LEDs
are both blinking at the same time,
your modem is updating its software.
Wait until the update completes.
STEP
Connecting your Wi-Fi Router
Wi-Fi Router
•
Connect one end of the ethernet cable to the
Ethernet port labeled "1. " DO NOT use the port
labeled "2, " as your internet connection is supplied
through port 1.
Your Wi-Fi router should now be connected
to the Internet!
•
Connect the other end of the ethernet cable to your
Wi-Fi Router.
•
Reference your router's manufacturer guide to
complete the setup.
If you purchased Flash Home Phone service, refer to the manual included
Coaxial Cable
Ethernet Cable (one end)
OTHER DEVICES
with your Phone Adapter to complete the setup.
Note:
You must have
a Wi-Fi router if you want
to set up a wireless
network in your home.
1
Modem Power Adapter
Ethernet Cable (second end)
Ethernet cable is
included in the box
Router Wi-Fi
WAN/Internet
Back of Router
Advertisement
