Safety Instructions - PROEL RMW10 Manual

RMW10

1. Safety Instructions

CAUTION: To reduce the risk of electric shock do not remove cover (or back panel). No user serviceable parts inside. Refer servicing
to qualified personnel only.
WARNING:
reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product enclosure that may
be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user of the presence of important operating and maintenance (servicing) instruction in the
literature accompanying the appliance. Please carefully read the owner's manual.
INSTRUCTIONS:
All safety and operating instructions should be read before the product is operated.
Retain these instructions:
All safety and operating instructions should be retained for future reference.
This owner's manual should be considered as a part of the product and it must accompany it every time, and delivered to the new user
when this product is sold. In this way the new owner will be aware of all the installation, operating and safety instructions.
Heed all warnings:
All warnings on the product and in owner's manual should be adhered to.
Heed all warnings.
Follow all instructions:
All operating and user's instructions must be followed.
Sentences preceded by
DETAILED SAFETY INSTRUCTIONS.
Water and moisture:
This apparatus should not be used near water (i.e. bathtub, kitchen sink, swimming pools, etc.)
Ventilation:
This apparatus should be placed in a position that does not interfere with correct ventilation. This unit, for example, should not be placed
on a bed, sofa cover or similar surfaces that could cover ventilation openings, or placed in a built-in installation, such a bookcase or a
cabinet that could block air flow trough ventilation openings.
Heat:
This apparatus should be placed away from heat sources, like radiators, heat registers, stoves or other products (including amplifiers) that
produce heat.
Power sources:
 This apparatus should only be connected to power source type specified in this owner's manual or on the unit.
 If the supplied AC power cable plug is different from the wall socket, please contact an electrician to change the AC power plug.
Grounding or Polarization:
 All precautions must be observed to do not defeat grounding or polarization.
 Unit metal parts are grounded through the AC power cord.
symbol contain important safety instruction. Please read it carefully.
14
To