Safety Instructions - PROEL RMW10 User Manual

RMW10

1. Safety Instructions

CAUTION: To reduce the risk of electric shock do not the remove cover or back panel. No user serviceable parts inside. Refer servicing to
qualified personnel only.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
This symbol is intended to alert the user of the presence of un-insulated dangerous voltage within the product enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user of the presence of important operating and maintenance (servicing) instruction in the literature
accompanying the appliance. Please carefully read the owner's manual.
INSTRUCTIONS
All safety and operating instructions should be read before the product is operated.
Retain these instructions
All safety and operating instructions should be retained for future reference.
This owner's manual should be considered as a part of the product and it must accompany it every time, and delivered to the new user when this
product is sold. In this way the new owner will be aware of all the installation, operating and safety instructions.
Heed all warnings
All warnings on the product and in owner's manual should be adhered to.
Follow all instructions
All operating and user's instructions must be followed.
Sentences preceded by symbol contain important safety instruction. Please read it carefully.
DETAILED SAFETY INSTRUCTIONS
Water and moisture
This apparatus should not be used near water (i.e. bathtub, kitchen sink, swimming pools, etc.).
Heat
This apparatus should be placed away from heat sources, like radiators, heat registers, stoves or other products (including amplifiers) that
produce heat.
Power sources

This apparatus should only be connected to power source type specified in this owner's manual or on the unit.

If the supplied AC power cable plug is different from the wall socket, please contact an electrician to change the AC power plug.
Grounding or Polarization:

All precautions must be observed to do not defeat grounding or polarization.

Unit metal parts are grounded through the AC power cord.

If the AC power outlet doesn't have grounding, consult an electrician for outlet grounding.
14