Samsung RL38SBIH Owner's Instructions Manual page 17

REVERSING THE DOOR SWING
‑ REVERSING THE HANDLE BAR [FRIDGE/FREEZER]
15. Detach the CAP SCREW
HANDLE with flat screwdriver and
disassemble the HANDLE BARs.
‑ ASSEMBLY OF THE FREEZER DOOR
18. Exchange the positions of a bolt and
the assy HINGE LOW after making
a hole with phillips head driver on
the left bottom side of the unit.
21. Switch the position of the
STOPPER DOOR and the
GROMMET HINGE as shown.
STOPPER
GROMMET
‑ ASSEMBLY OF THE FRIDGE DOOR
24. Carefully put the Fridge door back on.
16. Switch the position of the
CAP HOLE DOORs, pulling
out and pushing them in.
19. After switching the position
of the CAP HOLE HINGE
LOW, reassemble the
COVER LEG FRONT.
22. Switch the position of the
GROMMET HINGE and
the CAP HINGE HOLE.
25. Secure the ASSY HINGE UPP with 3 bolts as
shown. Make sure the Fridge Door is firmly closed.
17
17. Reattach the HANDLE
BARs on the other side of
doors in reverse order.
20. Switch the position of the
CAP HOLE HINGE MID
and a screw.
23. Carefully put the Freezer door
back on and assemble HINGE
MID with 2 bolts and a screw.