Reversing The Door Swing - Samsung RL38SBIH Owner's Instructions Manual

REVERSING THE DOOR SWING

‑ Read these instructions completely and carefully
• Before reversing the door, ensure first that the refrigerator is disconnect by the plug
from the mains. You should take out contents and accessories like door guard from
Warning
the doors. Be careful not to drop the doors during disassembling or assembling.
1. Handle parts carefully to avoid scratching the paint.
2. Lay out all the screws by their related parts to avoid using them in the wrong places.
3. Provide a non-scratching work surface for the doors. (ex:blanket)
4. During door reversing, refrigerator should not be stained with oil.
5. We recommend to use tools descrided below. (Possible to use simliar size of socket
wrench & wrench)
Phillips Head Flat Head
Driver (+)
‑ DISASSEMBLY OF THE FRIDGE DOOR
These operating instructions cover various models.
The characteristics of your appliance may differ slightly from those described in this instructions.
1. Disassemble the CAP CABI
after removing 2 screws.
CAP CABI
4. Disassemble the Fridge door
by lifting it upward.
Be careful not to drop and
scratch the face of the
Fridge door.
Not provided
10mm
Socket Wrench
Driver (-)
(for bolts)
2. Disconnect electric wires
inside of the CAP CABI.
5. Disassemble the COVER
WIRE DOOR on the top of
the fridge door with a flat-
head screw driver by putting it
into the indicated position(∆).
COVER WIRE DOOR
11mm Allen Wrench
Wrench
(for hinge shaft) (for Mid hinge)
3. Remove 3 bolts on the top
6. Disjoin the COVER WIRE
15
Additional part
Cover Wire
(3/16inch) Hinge L
(In Top Cover)
of the refrigerator with 10mm
socket wrench. Make sure the
door is firmly closed.
HINGE R from the ASSY
HINGE UPP as shown. Take
out the electric wire from the
COVER WIRE HINGE R.
COVER WIRE HINGE R
ASSY HINGE UPP