using with a Windows computer
USING THE Intelli-studio PROGRAMME
Using the Intelli-studio programme built into your
camcorder, you can transfer video and photo files to your
PC and edit them on your PC screen. Intelli-studio offers
the most convenient way for you to manage your video
and photo files.
Step 1. Connecting the USB cable
1. Set "PC Software: On." page 56
•
This is the default setting.
2. Connect the built-in USB plug of the camcorder to the USB port
of the PC.
•
A new file saving screen appears with the Intelli-studio main
window.
•
Depending on your version of Windows, the removable disk
window also appears.
3. Click "Yes." The uploading procedure starts. Click "Yes" to
confirm.
•
If you do not want to save a new file, select "No."
To disconnect the USB cable
To disconnect the USB cable after completing the file transfer, you must follow these steps:
1. Click the "Safely Remove Hardware icon" icon on the taskbar.
2. Select "USB Mass Storage Device," and then click "Stop."
3. If the "Stop a Hardware device" window appears, click "OK."
4. Disconnect the camcorder's built-in USB plug from the PC.
•
Make sure you insert the USB plug into the USB jack with the plug facing in the correct direction.
•
Use the AC power adaptor to power the camcorder when transferring files to your computer.
•
When the built-in USB plug is connected, turning the camcorder on or off may cause the PC to
malfunction.
•
If you disconnect the built-in USB plug from the PC or the camcorder while transferring files, the data
transmission will stop and the data may be damaged.
•
If you connect the built-in USB plug to a PC via a USB HUB or simultaneously connect the built-in USB
plug along with other USB devices, the camcorder may not work properly. If this occurs, remove all USB
devices from the PC and reconnect the camcorder.
•
Intelli-studio may not automatically run. If this occurs, access My Computer or Windows Explorer, open the
60
drive that corresponds to your camcorder, find Intelli-studio, and then run IStudio.exe.
Menu