Emulation Menu - Samsung ML-4550 User Manual

Emulation menu

Use the 6. Emulation menu to configure printer language emulation.
Item
Emulation
Values: Auto, PCL, PostScript, EPSON,
Type
HEXDUMP, PS3, IBM ProPrint
The printer language defines how the computer
communicates with the printer.
If you select Auto, your printer can change the
printer language automatically.
Setup
Values: PCL, PostScript, EPSON
See the following tables to configure properties of the
printer language.
PCL
This menu sets the PCL emulation configuration. You can set the font
type, symbol type, lines per page, and font size.
Item
Typeface
Values: PCL1 ~ PCL54
You can select the standard font to be used in PCL
emulation.
• PCL1~PCL7's interval between letters is fixed, and
PCL8~PCL45's interval is proportional to the font
type and font size. You can adjust the font size of
PCL1~PCL7 using the Pitch item, and
PCL8~PCL45 can do using
• PCL46~PCL54's interval and font size are fixed.
Symbol
Values: ROMAN8 ~ PCCYRIL
This item selects the symbol set to be used in PCL
emulation. The symbol is the group of numbers,
marks, and special signs being used when printing
letters.
Depending on the Typeface setting, available symbol
sets vary.
Point Size
Values: 4.00 ~ 999.75 (0.25 unit)
When you select one between PCL8 and PCL45 from
the Typeface menu, you can determine the font size by
setting the height of the characters in the font.
Courier
Values: Regular, Dark
This item lets you select the version of Courier font to
use.
Explanation
Explanation
item.
Point Size
Item
Pitch
Values: 0.44 ~ 99.99 (0.01 unit)
When you select one between PCL1 and PCL7 from
the Typeface menu, you can determine the font size by
setting the number of characters that will print in one
horizontal inch of type. The default value, 10 is the
best size.
Lines
Values: [5 ~ 128]:64
This item allows you to set vertical spacing from 5 to
128 lines for the default paper size. The default
number of lines may differ according to the paper size
and printing orientation.
PostScript
This menu provides you with the Print PS Error menu item.
Item
Print PS
Values: On, Off
Error
You can select whether or not your printer prints an
error list when a PS error occurs.
• Select On to print PS 3 emulation errors. If an error
occurs, the job stops processing, the error message
prints, and the printer flushes the job.
• If this menu is set to Off, the job is flushed without an
indication of the error.
EPSON
This menu sets the EPSON emulation configuration.
Item
Font
Values: SANSERIF, ROMAN
You can select the default font will be used in EPSON
emulation.
Character
Values: USA, FRANCE, GERMANY, UK,
Set
DENMARK1, SWEDEN, ITALY, SPAIN1, JAPAN,
NORWAY, DENMARK2, SPAIN2, LATIN
This item allows you to select a character set of the
desired language.
Character
Values: ITALIC, PC437US, PC850
Tab.
This item selects the character set.
2.6
<System setup>
Explanation
Explanation
Explanation